Home / Justin's stuff / RC Stuff / Server Power Supply 24
Converted server power supply to power my charger
- IMAG0803.jpg
- IMAG0804.jpg
- IMAG0785.jpg
New design that has smaller login pin plugs and cleaner shrink wrapping for the ground/12v wires. - New design that has smaller login pin plugs and cleaner shrink wrapping for the ground/12v wires. - IMG_0261.jpg
A power supply I sold, person covered it in carbon fiber pattern vinyl wrap. - A power supply I sold, person covered it in carbon fiber pattern vinyl wrap. - IMAG0769.jpg
- IMAG0771.jpg
- IMAG0770.jpg
- IMAG0747.jpg
Some howto's say to connect 6,9,10 pins together with wire, but that was a pain so I switched to servo plugs and wires. It is also better to connect pins 6,8,10 and also 4 (4 slows the fan speed). - Some howto's say to connect 6,9,10 pins together with wire, but that was a pain so I switched to servo plugs and wires. It is also better to connect pins 6,8,10 and also 4 (4 slows the fan speed). - IMAG0749.jpg
Don't do it this way :) - Don't do it this way :) - IMAG0751.jpg
Use servo plugs and pull out the wires you do not need from the plugs. Twist them together to test the PSU power and fan functionality. - Use servo plugs and pull out the wires you do not need from the plugs. Twist them together to test the PSU power and fan functionality. - IMAG0752.jpg
- IMAG0753.jpg
Testing to make sure it powers the SkyRC Ultimate 800 charger before soldering. - Testing to make sure it powers the SkyRC Ultimate 800 charger before soldering. - IMAG0754.jpg
- IMAG0755_BURST002.jpg
I used 12awg wire from my LHS and soldered them in between the spade plugs. Ground is on the left and 12v out is on the right (obviously). - I used 12awg wire from my LHS and soldered them in between the spade plugs. Ground is on the left and 12v out is on the right (obviously). - IMAG0756.jpg
Soldering in 4mm female banana connectors that my chargers male connectors plug into. - Soldering in 4mm female banana connectors that my chargers male connectors plug into.