Conversion to rear disk brakes from an Integra GSR.
- gsr_brakes_017.jpg
BEAUTY! now all thats left to do is take a few laps arround the block with the ebrake slightly pulled to polish them babies up! - BEAUTY! now all thats left to do is take a few laps arround the block with the ebrake slightly pulled to polish them babies up! - gsr_brakes_016.jpg
another empty wheel well - another empty wheel well - gsr_brakes_015.jpg
removing the clip from the brake line - removing the clip from the brake line - gsr_brakes_014.jpg
unbolting trailing arm - unbolting trailing arm - gsr_brakes_013.jpg
couple bolts left. the whole assembly should hang in place even with all the bolts removed as seen in the picture. removing the 2 larger bols will allow it to be removed. tire is placed under the drum for safety reasons. - couple bolts left. the whole assembly should hang in place even with all the bolts removed as seen in the picture. removing the 2 larger bols will allow it to be removed. tire is placed under the drum for safety reasons. - gsr_brakes_012.jpg
all 3 of the bolts on the controll arm are size 14 and must be removed. CAUTION!! the whole assembly weights about 50lbs so dont have hands, feet, or any other body part under it. - all 3 of the bolts on the controll arm are size 14 and must be removed. CAUTION!! the whole assembly weights about 50lbs so dont have hands, feet, or any other body part under it. - gsr_brakes_011.jpg
removing the suspension from the rear. - removing the suspension from the rear. - gsr_brakes_010.jpg
ugly isnt it? - ugly isnt it? - gsr_brakes_009.jpg
step 1 - step 1 - gsr_brakes_008.jpg
drum brake assembly. - drum brake assembly. - gsr_brakes_007.jpg
empty wheel well. hint: use the rubber plug from bleed valve to stop the brake line from dripping. - empty wheel well. hint: use the rubber plug from bleed valve to stop the brake line from dripping. - gsr_brakes_006.jpg
remove center console to loosen the ebrake lines for removal. - remove center console to loosen the ebrake lines for removal. - gsr_brakes_005.jpg
This shows the rubber boots pulled from the body ready to remove the cables. - This shows the rubber boots pulled from the body ready to remove the cables. - gsr_brakes_004.jpg
ebrake lines must be pulled. remove heatshield to get to em. - ebrake lines must be pulled. remove heatshield to get to em. - gsr_brakes_003.jpg
removed bolts that hold the trailing arm on. - removed bolts that hold the trailing arm on.