- DSC00666.JPG
Integra rear disk conversion - Integra rear disk conversion - DSC00760.JPG
Civic SI console, little cracked. - Civic SI console, little cracked. - DSC00761.JPG
After the rotors were turned - After the rotors were turned - DSC00790.JPG
Before the conversion. - Before the conversion. - DSC00791.JPG
Removing the old console. Just need a small philips for this. - Removing the old console. Just need a small philips for this. - DSC00792.JPG
- DSC00793.JPG
SI console next to the old one. - SI console next to the old one. - DSC00794.JPG
- DSC00795.JPG
First we loosen the e-brake cables. This is 12mm. - First we loosen the e-brake cables. This is 12mm. - DSC00796.JPG
Then we remove the retaining bracket that holds the cables. These are also 12mm bolts. - Then we remove the retaining bracket that holds the cables. These are also 12mm bolts. - DSC00797.JPG
Now we break free the 10mm brake line. - Now we break free the 10mm brake line. - DSC00798.JPG
Here were removing the lower shock bolt. This will give us a little bit of freedom to move once we unbolt everything else. 14mm - Here were removing the lower shock bolt. This will give us a little bit of freedom to move once we unbolt everything else. 14mm - DSC00799.JPG
Next we remove this 14mm bolt that connects the trailing arm to the lower control arm. - Next we remove this 14mm bolt that connects the trailing arm to the lower control arm. - DSC00800.JPG
Now we remove this 14mm bolt connecting the trailing arm to the upper control arm. - Now we remove this 14mm bolt connecting the trailing arm to the upper control arm. - DSC00801.JPG
Using a screwdriver we pull back the clip that holds the rubber line to the bracket. - Using a screwdriver we pull back the clip that holds the rubber line to the bracket.