|
Access to fuel pump under back seat
Date: 10/18/2002
Views: 986
|
Date: 10/18/2002
Views: 412
|
Date: 10/18/2002
Views: 385
|
Swapping new GSS342 in place of stock pump
Date: 10/18/2002
Views: 393
|
Date: 10/18/2002
Views: 404
|
Date: 10/18/2002
Views: 343
|
Comparison shot
Date: 10/18/2002
Views: 610
|
Fuel tank
Date: 10/18/2002
Views: 395
|
AEM fuel rail
Date: 10/18/2002
Views: 418
|
Date: 10/18/2002
Views: 496
|
|
Clipping wiring from stock injector clips
Date: 10/18/2002
Views: 916
|
Date: 10/18/2002
Views: 444
|
Date: 10/19/2002
Views: 571
|
Date: 10/19/2002
Views: 449
|
AEM rail fitted with DSM 450cc injectors
Date: 10/19/2002
Views: 620
|
|
The grommets that fit in the rail needed to be bored out quite a bit for the injectors to fit. I used a drill bit wrapped in sandpaper.
Date: 10/19/2002
Views: 571
|
Date: 10/19/2002
Views: 687
|
Wiring in the resistor box. Test which 4 wires connect to the injectors with a multimeter. The leftover 4 wires are the power connection to the resistor box.
Date: 10/19/2002
Views: 516
|
Date: 10/19/2002
Views: 540
|
SS line from stock fuel filter. Fitting on filter is: -6 to 12MMx1.25 Union.
Date: 10/19/2002
Views: 964
|
|
Aeromotive FPR mounted. I used metal screws to screw mount it on the firewall. Had to drill small holes as prep holes for the screws though.
Date: 10/19/2002
Views: 551
|
Resistor box mounted on the inside fender well on drivers side. Fits nicely and was able to use a stock bolt hole, only had to put one screw in there.
Date: 10/19/2002
Views: 414
|
Date: 10/19/2002
Views: 356
|
Date: 10/20/2002
Views: 942
|
Date: 10/20/2002
Views: 608
|
