Reply

You would have to look at the wiring schematics at the end of the walkthrough in order to wire them up without the harness that connects to the fusebox. It would be best to find that section of harness though.

Posted by Erik M. on Thu 07 Dec 2006 08:01:26 AM MST

Question with The wire infromation.

i just wonder.i have the door harness and all.but my car does not have the power window and harness from the fusebox
and what i can do to connect them or how to rewire theM?? do you got any diy ??please help

Posted by Guest on Sat 02 Dec 2006 10:03:03 PM MST

Kevin

Do anyone have pics of the other wiring harness for the complete setup? like the wire that goes all the way from the passenger door...lmk thanks

Posted by Guest on Thu 30 Nov 2006 10:06:44 PM MST

Quesion with wire

i got all the part's for this coversion, but then.when i found out.there's only 5 wire in my car and the power window lock and everything have over 10 wire's.in that case how can i make power window and lock for my car?? do i need to wire them from one ...

i got all the part's for this coversion, but then.when i found out.there's only 5 wire in my car and the power window lock and everything have over 10 wire's.in that case how can i make power window and lock for my car?? do i need to wire them from one side to other ??
please email me at djnauticz@hotmail.com thanks
need a big help now thanks

Posted by Guest on Sat 18 Nov 2006 08:02:01 PM MST

I got mine on ebay.

Posted by Erik M. on Mon 26 Sep 2005 07:04:10 AM MDT

tony

where did you get your wiring harness from?

Posted by Guest on Sat 24 Sep 2005 08:34:22 PM MDT

Erik M. (erik)

Steps would be the same only reversed.

Posted by Guest on Wed 01 Jun 2005 12:05:15 PM MDT

93si

i have a rhd power window conversion...where to start??

Posted by Guest on Wed 01 Jun 2005 03:26:00 AM MDT

newb

I left it disconnected and sunroof still works. I was having problems with driver side switch that activates the dome light before swap and now it doesn't work at all. I have not had time to investigate. Maybe there is a connection problem or rather...

I left it disconnected and sunroof still works. I was having problems with driver side switch that activates the dome light before swap and now it doesn't work at all. I have not had time to investigate. Maybe there is a connection problem or rather disconnetion problem.

Posted by Guest on Tue 26 Apr 2005 12:35:32 PM MDT

Erik M. (erik)

hrmm. Are you sure its not for the sunroof. Im pretty sure its for the sunroof motor but Im not 100% sure.

Posted by Guest on Thu 07 Apr 2005 08:32:25 AM MDT

newb

I found these wires belong to the dome light. These remain unconnected when preforming pwr window swap.

Posted by Guest on Tue 05 Apr 2005 01:35:17 PM MDT

newb

on the middle harness the one from door to interior. what is the plug with 2 green/? striped wires? And where does it go.

Posted by Guest on Sat 02 Apr 2005 07:30:23 PM MST

95 Civ DX

On my door harrness its cut right after it enters the cab can i still use it or do i need another? alaso will a harness for a 4 door civic work?

Posted by Guest on Sat 08 Jan 2005 12:46:07 PM MST

they grey box is the power lock control module. if you are using stock lock actuators then you will need it.

Posted by Erik M. on Wed 24 Nov 2004 10:05:24 AM MST

De'Shawn Shinette

What is the grey box? I have all of the parts needed to do this swap but I don't have the grey box. Do I need this or do the lock actuators replace this? Can you email me at deshawnshinette@hotmail.com concerning this question?

Posted by Guest on Wed 24 Nov 2004 06:29:15 AM MST