|
2 new Alpine amps about $170 each from the caraudioshoppe on ebay.
Date: 07/25/2003
Views: 246
|
V12 baby each will put out a max of 600 wats to each one of my subs.
Date: 07/25/2003
Views: 187
|
Opened up showing the controlls.
Date: 07/25/2003
Views: 188
|
Built box frames for creating fiberglass amp racks.
Date: 07/25/2003
Views: 191
|
Another angle.
Date: 07/25/2003
Views: 184
|
|
Ah lovely. My subs wich ive had for 2 years are finally going to see some action.
Date: 07/25/2003
Views: 220
|
12\" dual voice coil subs capable of supporting over 1000 wats each.
Date: 07/25/2003
Views: 160
|
Fiberglassed base of the trunk. Its actually fiberglassed in 3 pieces so i can take it in and out of the car.
Date: 07/25/2003
Views: 246
|
A dark picture but you can see the overlapping section of the panels.
Date: 07/25/2003
Views: 205
|
Showing the 3 sections.
Date: 07/25/2003
Views: 194
|
|
These side sections is where I will glass the amps into the 3 piece enclosure.
Date: 07/25/2003
Views: 171
|
Layoing out 11 oz. woven mat for support structure over the fiberglass reinforced bondo.
Date: 07/26/2003
Views: 213
|
Resin painted into the mat.
Date: 07/26/2003
Views: 191
|
Getting ready to start on the amp frame emclosures.
Date: 07/26/2003
Views: 204
|
Marking out the center for support swivel structure.
Date: 07/26/2003
Views: 171
|
|
Halv of swivel attached to the frame.
Date: 07/26/2003
Views: 182
|
Bottom of swivel attached with a bolt.
Date: 07/26/2003
Views: 161
|
Another angle.
Date: 07/26/2003
Views: 159
|
I lined one up in the trunk and then matched the other with a straight edge.
Date: 07/26/2003
Views: 172
|
Frame attached to the base and a baffel screwed to the base for design purposes.
Date: 07/26/2003
Views: 186
|
|
Startin to wrap the enclosure.
Date: 07/26/2003
Views: 195
|
Nearly wrapped.
Date: 07/26/2003
Views: 179
|
My dad mixing up some resin and catalyst.
Date: 07/26/2003
Views: 196
|
Resin painted into the material.
Date: 07/26/2003
Views: 193
|
SANY0205
Date: 07/26/2003
Views: 214
|
