Lining up the bracket for the oil filter relocation kit

testing fitment.

Bracket shown here attached to the intake manifold.

This harness mounting point hed to be bent out of the way for fitment.

Hoses connected to the filter side and all connections plugged.

Block adaptor attached and tightened down.

Lines connected and tightened down.

For Turbo. Here you can see how I had to rig some brass fittings to put the oil feed where I wanted it. I used a 1/8 BSPT to 1/8 NPT union, 2 1/8 NPT female/male 90 degree elbows, 1 1/8 NPT female/female 90 degree elbow, 1 1/8 NPT female/male 45 degree el

Bet you dont see this too terribly often under the hood of a Honda. TRD oil filter from a 86 corolla. Needed with the relocatoin kit.

Here you can see where my oil feed comes from. It runs all the way arround the valve cover and into the turbo.